See also:

Compass Calibration Procedure
1. Before calibrating the compass, check that the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section. ...

Column Shift
If the shifter cannot be moved out of P (Park) 1. Apply and maintain the regular brakes. 2. Turn the ignition key to the ON/RUN position. See Ignition Positions for more information. 3. Shift out ...

Hitches
Use the correct hitch equipment. See your dealer or a hitch dealer for assistance. • The rear bumper on the vehicle is not intended for hitches. Do not attach rental hitches or other bumpe ...