See also:

License Plate Lamp
To replace one of these bulbs: 1. Push the left end of the lamp assembly toward the right. 2. Turn the lamp assembly down to remove it from the fascia. A. Bulb Socket B. Bulb C. Lamp Assembly ...

Stoplamp,Taillamp, and Turn Signal Lamp
Driver Side Shown, Passenger Side Similar A. Taillamp B. Turn Signal Lamp C. Stoplamp/Taillamp To replace any one of these bulbs: 1. Open the trunk. 2. Remove the push pins securing the trunk ...

When to Add Engine Oil
If the oil is below the cross-hatched area at the tip of the dipstick, add 1 L (1 qt) of the recommended oil and then recheck the level. See “Selecting the Right Engine Oil” in this section ...