See also:

Erasing Universal Home RemoteButtons
To erase programming from the three Universal Home Remote buttons do the following: 1. Press and hold down the two outside buttons until the indicator light begins to flash, after 20 seconds. Do ...

Stoplamp,Taillamp, and Turn Signal Lamp
Driver Side Shown, Passenger Side Similar A. Taillamp B. Turn Signal Lamp C. Stoplamp/Taillamp To replace any one of these bulbs: 1. Open the trunk. 2. Remove the push pins securing the trunk ...

Brake System Warning Light
The vehicle’s hydraulic brake system is divided into two parts. If one part is not working, the other part can still work and stop the vehicle. For good braking both parts need to be working. ...