Canceling a Remote Start
To cancel a remote start, do one of the following:
• Aim the RKE transmitter at the
vehicle and press and hold 
until the parking lamps turn off.
• Turn on the hazard warning flashers.
• Turn the vehicle on and then off.
See Remote Vehicle Start.
See also:
Trailer Brakes
If your trailer weighs more than 1,500 lbs (680 kg)
loaded, then it needs its own brakes — and
they must be adequate. Be sure to read and follow
the instructions for the trailer brakes so you’l ...
Add-On Electrical Equipment
Notice: Do not add anything electrical to the vehicle unless you check with your
dealer first. Some electrical equipment can damage the vehicle and the damage would
not be covered by the vehicle&# ...
EPB Apply
The EPB can be applied any time
the vehicle is stopped. The EPB is
applied by momentarily lifting up on
the EPB switch. Once fully applied,
the parking brake status light will be
on. While t ...