Initial Drive Information
See also:
Display Settings
Press the Config button on the Home Page or the CONFIG button on the faceplate,
then select Display Settings from the list.
The following options may display: Dimming Mode: Press to change the scre ...
Front Reading Lamps
The front reading lamps are located on the headliner.
Press the button near each lamp to turn them on or off. ...
EPB Release
To release the EPB, place the ignition in the ON/RUN position, apply and hold
the brake pedal, and push down momentarily on the EPB switch. If you attempt to
release the EPB without the brake peda ...
