Remote Keyless Entry (RKE) System

See Radio Frequency Statement  for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-210/220/310.

If there is a decrease in the RKE operating range:

► Check the distance. The transmitter may be too far from the vehicle.
► Check the location. Other vehicles or objects may be blocking the signal.
► Check the transmitter's battery.

See “Battery Replacement” later in this section.
► If the transmitter is still not working correctly, see your dealer or a qualified technician for service.

    See also:

    Fabric/Carpet
    Start by vacuuming the surface using a soft brush attachment. If a rotating brush attachment is being used during vacuuming, only use it on the floor carpet. Before cleaning, gently remove a ...

    Safety Warnings and Symbols
    Warning Messages found on vehicle labels and in this manual describe hazards and what to do to avoid or reduce them. Danger indicates a hazard with a high level of risk which will result in ser ...

    Programming without a Recognized Transmitter (Keyless Access Vehicles Only)
    If there are no currently recognized transmitters available, follow this procedure to program up to five transmitters. This feature is not available in Canada. This procedure will take appro ...