See also:

Leaving After Parking on a Hill
1. Apply and hold the brake pedal while you: 1.1. Start the engine. 1.2. Shift into a gear. 1.3. Release the parking brake. 2. Let up on the brake pedal. 3. Drive slowly until the trailer is clea ...

Manual Locks
From the outside, unlock the door using either the key or the RKE transmitter. From the inside, use the power door lock switches or manual lock knobs located at the top of the door panel near t ...

Using the Directory Command
The directory command lists all of the name tags stored by the system. To use the directory command: 1. Press and hold for two seconds. The system responds with “Ready” followed by a tone. ...