Finish Damage
Any stone chips, fractures, or deep scratches in the finish should be repaired right away. Bare metal will corrode quickly and may develop into major repair expense.
Minor chips and scratches can be repaired with touch-up materials available from your dealer. Larger areas of finish damage can be corrected in your dealer's body and paint shop.
See also:
Resuming a Set Speed
Suppose you set your cruise control at a desired
speed and then you apply the brake. This, of
course, shuts off the cruise control. But you do not
need to reset it.
Once you are going about 25 m ...
Total Weight on Your Vehicle's Tires
Be sure the vehicle's tires are inflated to the upper limit for cold tires. These
numbers can be found on the Tire and Loading Information label. See Vehicle Load
Limits . Make sure not to go ...
Traction – AA, A, B, C
The traction grades, from highest to lowest, are AA, A, B, and C. Those grades
represent the tire's ability to stop on wet pavement as measured under controlled
conditions on specified governm ...