Technical Data

See also:

Programming without a Recognized Transmitter (Keyless Access Vehicles Only)
If there are no currently recognized transmitters available, follow this procedure to program up to five transmitters. This feature is not available in Canada. This procedure will take approximate ...

ENGINE OIL HOT, IDLE ENGINE
This message displays when the engine oil temperature is too hot. Stop and allow the vehicle to idle until it cools down. ...

Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
A. Back-Up Lamp B. Turn Signal Lamp To replace one of these lamps: 1. Open the trunk. See Trunk. 2. Remove the fasteners and pull back the trunk trim. 3. Remove the four plastic wing nuts h ...