Error Messages

If Disc Read Error displays and/or the disc comes out, it could be for one of the following reasons:

• The disc has an invalid or unknown format.

• The disc is not from a correct region.

• The disc is very hot. Try the disc again when the temperature returns to normal.

• The road is very rough. Try the disc again when the road is smoother.

• The disc is dirty, scratched, wet, or upside down.

• The air is very humid. Try the disc again later.

• There was a problem while burning the disc.

• The label is caught in the CD player.

If the CD is not playing correctly, for any other reason, try a known good CD.

If any error continues, contact your dealer.

    See also:

    Safety Belt Reminder Light
    When the engine is started, a chime sounds for several seconds to remind a driver to fasten the safety belt, unless the driver safety belt is already buckled. The safety belt light comes on a ...

    SBZA Detection Zones
    The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, or 3.5m(11 ft). This zone starts at each side mirror and goes back approximately 5.0 m(16 ft). Th ...

    How to Reset the Engine Oil Life System
    Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change. To reset the system: 1. Turn the ignition to ON/RUN with the engine off. 2. ...