Driving Information

See also:

License Plate Lamp
To replace one of these bulbs, do the following: 1. Remove the two screws holding the license plate lamp lens. 2. Pull the lens away from the lamp assembly. 3. Pull the old bulb from the bulb ...

Jump Starting
If your vehicle’s battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. CAUTION: Batterie ...

Removing the Spare Tire and Tools
The equipment you will need is located in the trunk. 1. Open the trunk. See Trunk. 2. Turn the center retainer counterclockwise to remove it. 3. Lift and remove the compact spare tire cover ...