To Transfer Audio to the Cell Phone

During a call with the audio in the vehicle:

1. Press “Ready”. The system responds with “Ready” followed by a tone.

2. Say “Transfer Call.” The system responds with “Transferring call” and the audio will switch from the vehicle to the cell phone.

    See also:

    When the Light Flashes First and Then Is On Steady
    If the light flashes for about a minute and then stays on, there may be a problem with the TPMS. If the problem is not corrected, the light will come on at every ignition cycle. See Tire Pressure ...

    Rocking Your Vehicle to Get It Out
    First, turn the steering wheel left and right. That will clear the area around the front wheels. Then shift back and forth between REVERSE (R) and a forward gear, spinning the wheels as little ...

    Using the Call Command
    1. Press and hold for two seconds. The system responds with “Ready” followed by a tone. 2. Say “Call”. The system responds with “Call using <phone name>. Please say the name ta ...