Using the Delete All Name Tags Command

The delete all name tags command deletes all stored phone book name tags and route name tags for OnStar (if present).

To use the delete all name tags command:

1. Press and hold The system for two seconds. The system responds with “Ready” followed by a tone.

2. Say “Delete all name tags”. The system responds with “You are about to delete all name tags stored in your phone directory and your route destination directory. Are you sure you want to do this? Please say yes or no.” • Say “Yes” to delete all name tags.

• Say “No” to cancel the function and return to the main menu.

    See also:

    Emergency Release for Opening Liftgate
    1. Remove the trim plug, located on the inside of the liftgate in the center, to expose the access hole in the trim panel. 2. Use a tool to reach through the access hole in the trim panel. 3. Pry ...

    Heated and Ventilated Seats
    Heated and Ventilated Seat Buttons Shown, Heated Seat Buttons Similar If available, the buttons are on the climate control panel. To operate, the ignition must be on. Press to heat the seat c ...

    Warning Lights, Gauges, and Indicators
    Warning lights and gauges can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to the warning lights and gauges c ...