Six-Disc CD (MP3) Player
To set the time and date:
1. Turn the ignition key to ACC/ACCESSORY or
ON/RUN. Press 
to turn the radio
on.
2. Press MENU.
3. Press the softkey below the 
tab. The HR, MIN,
MM, DD, YYYY displays.
4. Press the softkey below any one of the tabs you want to change.
5. To increase the time or date, do one of the following:
• Press the softkey located below the selected tab.
• Press 
SEEK, or
FWD.
• Turn 
clockwise.
6. To decrease the time or date, do one of the following:
• Press 
SEEK or
REV.
• Turn counterclockwise.
The date does not automatically display. To see the date
press MENU and then softkey below the
tab while the
radio is on. The date with display times out after a few
seconds and goes back to the normal radio and time
display.
To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year:
1. Press MENU, and then the softkey below the
tab. The HR, MIN, MM, DD, YYYY
displays.
2. Press the softkey below the forward arrow tab. The time 12H and 24H, and the date MM/DD/YYYY (month, day, and year) and DD/MM/YYYY (day, month, and year) displays.
3. Press the softkey located below the desired option.
4. Press MENU again to apply the selected default, or let the screen time out.
See also:
Setting the 12/24 Hour Format
1. Press the CONFIG button and
select Time Settings,
or press .
2. Highlight 12/24 Hour Format.
3. Press SELECT to select the
12 hour or 24 hour display
format. ...
Tire Pressure
Tires need the correct amount of air pressure to operate effectively.
Notice: Neither tire underinflation nor overinflation is good. Underinflated
tires, or tires that do not have enough air, can r ...
Fog Lamps
To replace the fog lamp bulb:
1. Locate the bulb assembly under the front fascia.
2. Disconnect the electrical connector from the bulb assembly.
3. Remove the bulb by turning it counterclockwise an ...