Increasing Speed While Using Cruise Control
To increase the cruise speed while using cruise control:
• Press and hold the +RES button on the steering wheel until the desired speed is reached, then release it.
• To increase vehicle speed in small increments, press the +RES button. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) faster.
See also:
Leaving the Vehicle with the Engine Running
WARNING
It can be dangerous to leave the vehicle with the engine running. The vehicle
could move suddenly if the shift lever is not fully in P (Park) with the parking
brake firmly set. And, if ...
Tire Sealant and Compressor Kit
This vehicle may come with a spare
tire and tire changing equipment or
a tire sealant and compressor kit.
The kit can be used to temporarily
seal small punctures in the tread
area of the tire ...
Parking/Turn Signal Lamp
1. Open the hood. See Hood .
2. Remove the parking/turn signal lamp bulb socket from the headlamp assembly
by turning counterclockwise.
3. Remove the bulb from the bulb socket by pulling it straig ...
