See also:

High-Beam Headlamp/ Low-Beam Headlamp
1. Open the hood. See Hood . 2. For the driver side bulb, remove the windshield washer bottle filler neck by firmly pulling it straight up and out of the bottle. 3. Remove the battery cover by pul ...

SBZA Detection Zones
The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, 3.5 m (11 ft). This zone starts at each side mirror and goes back approximately 5 m (16 ft). The hei ...

Removal and Installation of the Sealant Canister
To remove the sealant canister: 1. Unwrap the sealant hose. 2. Press the canister release button. 3. Pull up and remove the canister. 4. Replace with a new canister which is available from you ...