Windshield Washer
Pull the windshield wiper lever toward you to spray windshield washer fluid and activate the wipers.
The washer and wipers will continue until the lever is released or the maximum wash time is reached.
When the windshield wiper lever is released, additional wipes may occur depending on how long the windshield washer had been activated.
If the washer fluid is low a message may display on the Driver Information Center (DIC), see Washer Fluid Messages . For information on filling the windshield washer fluid reservoir, seeWasher Fluid .
WARNING
In freezing weather, do not use the washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision.
See also:
Maintenance Footnotes
(a) Visually inspect brake lines and hoses for
proper hook-up, binding, leaks, cracks, chafing,
etc. Inspect disc brake pads for wear and rotors for
surface condition. Inspect other brake parts,
i ...
Brake Fluid
The brake master cylinder
reservoir is filled with DOT
3 brake fluid. See Engine
Compartment Overview for the location
of the reservoir.
There are only two reasons why the brake fluid level ...
To Use the Engine Heater
1. Turn off the engine.
2. Open the hood and unwrap the electrical cord. The electrical cord is located
on the passenger side of the engine compartment, near the air cleaner.
3. Plug it into a n ...