Turn-by-Turn Navigation
1. Push
to connect to a live
Advisor.
2. Request directions.
3. Directions are downloaded to the vehicle.
4. Follow the voice-guided commands.
See also:
Jump Starting (with or without eAssist)
For more information about the
vehicle battery, see Battery.
If the battery has run down, try to
use another vehicle and some
jumper cables to start your vehicle.
Be sure to use the following ...
Programming with a Recognized
Transmitter (Keyless Access
Vehicles Only)
A new transmitter can be
programmed to the vehicle when
there is one recognized transmitter.
To program, the vehicle must be off
and all of the transmitters, both
currently recognized and new ...
How the System Works
URPA comes on automatically when
the shift lever is moved into
R (Reverse). A single tone sounds
to indicate the system is working.
URPA operates only at speeds less
than 8 km/h (5 mph).
An ...
