OnStar

See also:

Tire and Loading Information Label
A vehicle-specific Tire and Loading Information label is attached to the vehicle's center pillar (B-pillar). With the driver door open, you will find the label attached below the door lock post. T ...

Checking Coolant
The vehicle must be on a level surface when checking the coolant level. Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling ...

Tire Sealant and Compressor Kit Storage
The tire sealant and compressor kit is located in the trunk. 1. Open the trunk. See Trunk 2. Lift the cover. 3. Turn the retainer clockwise and remove the tire sealant and compressor kit. To ...