Infotainment System Menus
Tone Settings
To access the tone settings, press the Home Page Tone button or the TONE button on the faceplate.
Use the tone settings to adjust the
following features:
• Setting the tone
• Adjusting the speakers
Setting the Tone
To adjust the tone:
• Treble: Touch Treble and then press + or − to change the level.
• Middle (Midrange): Touch Middle and then press + or − to change the level.
• Bass: Touch Bass and then press + or − to change the level.
Adjusting the Speakers
To adjust the speaker balance:
• Press the left arrow on the bottom for more sound from the left speakers or the right arrow on the bottom for more sound from the right speakers. The middle position balances the sound between the left and right speakers.
To adjust the speaker fade:
• Press the upper arrow for more sound from the front speakers and the lower arrow for more sound from the rear speakers.
The middle position balances the sound between the front and rear speakers.
EQ Settings
The EQ settings are selected through the tone menu. Press the left or right arrows to cycle through the EQ options. The available choices are Pop, Rock, Jazz, Classical, and Talk.
See also:
Service All-Wheel Drive Light
This light should come
on briefly when you turn
on the ignition, as a
check to show you it
is working.
The service all-wheel drive light comes on to
indicate that there may be a problem with ...
Low-Beam Headlamps/Daytime Running Lamps (DRL), High-Beam Headlamps (Base)
1. For the driver side bulb, remove the windshield washer bottle filler neck by firmly pulling it straight up and out of the bottle.
2. Remove the outside cap for the low-beam headlamp/DRL bulb repla ...
Daytime Running Lamps (DRL)
Daytime Running Lamps (DRL) can make it easier for
others to see the front of your vehicle during the
day. Fully functional daytime running lamps are required
on all vehicles first sold in Canad ...