Changing a Flat Tire

If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. See Hazard Warning Flashers .

WARNING:
Changing a tire can be dangerous. The vehicle can slip off the jack and roll over or fall on you or other people. You and they could be badly injured or even killed. Find a level place to change your tire. To help prevent the vehicle from moving:
1. Set the parking brake firmly.
2. Put the shift lever in P (Park).
3. Turn off the engine and do not restart while the vehicle is raised.
4. Do not allow passengers to remain in the vehicle.
To be even more certain the vehicle will not move, you should put blocks at the front and rear of the tire farthest away from the one being changed.
That would be the tire, on the other side, at the opposite end of the vehicle.

When the vehicle has a flat tire (B), use the following example as a guide to assist you in the placement of wheel blocks (A).

A. Wheel Block

A. Wheel Block
B. Flat Tire

The following information explains how to use the jack and change a tire.

    See also:

    Owner Checks and Services
    At Each Fuel Stop Check the engine oil level. See Engine Oil . Once a Month Check the tire inflation pressures. See Tire Pressure . Inspect the tires for wear. See Tire Inspection . Che ...

    Control of a Vehicle
    You have three systems that make your vehicle go where you want it to go. They are the brakes, the steering, and the accelerator. All three systems have to do their work at the places where the ...

    Exterior Lighting
    The exterior lamp control is located to the left of the steering column on the instrument panel. : Briefly turn to this position to turn the automatic lamp control off or on again. AUTO: Turn ...