Cold Temperature Operation
If in an area of extreme cold, where the temperature falls below −20°F (−29°C), use either an SAE 5W-30 synthetic oil or an SAE 0W-30 engine oil. Both provide easier cold starting for the engine at extremely low temperatures. Always use an oil that meets the required specification, GM6094M. See “What Kind of Engine Oil to Use” for more information.
See also:
All-Wheel Drive
When to Check Lubricant
It is not necessary to regularly check fluid unless
you suspect there is a leak or you hear an
unusual noise. A fluid loss could indicate a
problem. Have it inspected and r ...
Increasing Speed While UsingCruise Control
There are two ways to go to a higher speed:
• Use the accelerator pedal to get to the higher
speed. Press the button at the end of the
lever, then release the button and the
accelerator pedal. ...
Instrument Panel Cluster
The instrument panel cluster is designed to show how the vehicle is running.
It shows how fast the vehicle is going,
how much fuel has been used, and many other things needed to drive safely and
...
