Finding a Station

BAND: Press to switch between FM, AM, or XM™ (if equipped). The selection displays.

stations. (Tune): Turn to select radio stations.

the next : Press to go to the previous or the next station and stay there.

To scan stations, press and hold either arrow for a few seconds until the radio beeps once. The radio goes to a station, plays for a few seconds, then goes to the next station. Press either arrow again to stop scanning.

The radio seeks and scans stations only with a strong signal that are in the selected band.

Radio Service, (Information) (With XM™ Satellite Radio Service, MP3, and RDS Features): Press to display additional text information related to the current FM-RDS or XM station; or CD, MP3 or WMA song. If information is available during XM, CD, MP3 or WMA playback, the song title information displays on the top line of the display and artist information displays on the bottom line. When information is not available, No Info displays.

    See also:

    Trailer Towing (Except eAssist)
    Before pulling a trailer, there are three important considerations that have to do with weight: • The weight of the trailer. • The weight of the trailer tongue. • The total weight on your ...

    Setting Preset PTYs (RDS Only)
    These pushbuttons have factory PTY presets. Up to 12 PTYs (six FM1 and six FM2), can be programmed on the six numbered pushbuttons, by performing the following steps: 1. Press BAND to select F ...

    Battery
    Refer to the replacement number shown on the original battery label when a new battery is needed. See Engine Compartment Overview  for battery location. WARNING Battery posts, terminals, an ...