Entering the Feature Settings Menu
1. Turn the ignition on and place the vehicle in P (Park).
To avoid excessive drain on the battery, it is recommended that the headlamps are turned off.
2. Press the customization button to enter the feature settings menu.
If the menu is not available, FEATURE SETTINGS AVAILABLE IN PARK will display. Before entering the menu, make sure the vehicle is in P (Park).
See also:
Performance
The Regal I tested packs the base engine — a 2.4-liter four-cylinder that's
good for 182 horsepower. There's no way around it: This is a sedate engine. You
probably won't notice that it lacks po ...
Heated Seats
On vehicles with heated seats, the controls are located
on the front doors and the ignition must be on to
use the feature.
: Press to heat the seat and
seatback.
: Press to heat the seatback ...
Erasing Universal Home Remote
Buttons
The programmed buttons should be erased when the
vehicle is sold or the lease ends.
To erase either Rolling Code or Fixed Code on the
Universal Home Remote device:
1. Press and hold the two outs ...