Setting Cruise Control
Cruise control will not work if the parking brake is set, or if the master cylinder brake fluid level is low.
The cruise control light on the instrument panel cluster comes on after the cruise control has been set to the desired speed. See Instrument Panel Cluster.
WARNING:
If you leave your cruise control on when you are
not using cruise, you might hit a button and go
into cruise when you do not want to. You could be
startled and even lose control. Keep the cruise
control switch off until you want to use cruise
control.
1. Press the button.
2. Get up to the desired speed.
3. Press and release the SET– button located on the steering wheel.
4. Take your foot off the accelerator.
See also:
Exterior Lighting
The exterior lamp control is located on the instrument panel on the outboard side of the steering wheel.
: Turns off the exterior lamps.
The knob returns to the AUTO position after it is released ...
Insuring the Vehicle
Protect your investment in the GM vehicle with comprehensive and collision insurance
coverage. There are significant differences in the quality of coverage afforded
by various insurance policy ter ...
Sensing System for Passenger
Airbag
The passenger sensing system will turn off the right
front passenger frontal airbag and seat-mounted
side impact airbag under certain conditions. The driver
airbags and roof-rail airbags are not ...