How to Inspect the Engine Air Cleaner/Filter

To inspect the air cleaner/filter, remove the filter from the vehicle and lightly shake the filter to release loose dust and dirt. If the filter remains covered with dirt, a new filter is required.

To inspect or replace the engine air cleaner/filter:

1. Remove the six screws that secure the cover on.

1. Remove the six screws that secure the cover on.

2. Lift off the cover.

3. Inspect or replace the engine air cleaner/filter.

4. Align the filter correctly.

5. Install the cover by lowering it over the filter and secure with the screws.

Operating the engine with the air cleaner/filter off can cause you or othersWARNING

Operating the engine with the air cleaner/filter off can cause you or others to be burned. The air cleaner not only cleans the air; it helps to stop flames if the engine backfires. Use caution when working on the engine and do not drive with the air cleaner/filter off.

which could damage it. Always have the air cleaner/filter in place when you areNotice: If the air cleaner/filter is off, dirt can easily get into the engine, which could damage it. Always have the air cleaner/filter in place when you are driving.

    See also:

    EPB Apply
    The EPB can be applied any time the vehicle is stopped. The EPB is applied by momentarily lifting up on the EPB switch. Once fully applied, the parking brake status light will be on. While t ...

    Cruise Control Light
    This light will come on when the cruise control is set. ...

    Hill Start Assist (HSA)
    This vehicle has a Hill Start Assist (HSA) feature, which may be useful when the vehicle is stopped on a grade. This feature is designed to prevent the vehicle from rolling, either forward o ...