Conditions in Which Remote Start Will Not Work

The remote vehicle start feature will not operate if:

  • The key is in the ignition (key access) or if the key is in the vehicle (keyless access).
  • The hood is not closed.
  • The hazard warning flashers are on.
  • The malfunction indicator lamp is on.
  • The engine coolant temperature is too high.
  • The oil pressure is low.
  • Two remote vehicle starts, or a single remote start with an extension, have already been used.
  • The vehicle is not in P (Park).
    See also:

    BATTERY SAVER ACTIVE
    This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery saver system starts reducing certain features of the vehicle t ...

    Checking Engine Oil
    It is a good idea to check the engine oil level at each fuel fill. In order to get an accurate reading, the oil must be warm and the vehicle must be on level ground. The engine oil dipstick handle is ...

    StabiliTrak® OFF Light
    This light comes on when the StabiliTraK system is turned off. If the Traction Control System (TCS) is off, wheel spin is not limited. If StabiliTrak is off, the system does not assist in controll ...