Shifting Into Park
WARNING!
It can be dangerous to get out of
the vehicle if the shift lever is not
fully in P (Park) with the parking
brake firmly set. The vehicle can
roll. If you have left the engine
running, the vehicle can move
suddenly. You or others could be
injured. To be sure the vehicle will
not move, even when you are on
fairly level ground, use the steps
that follow.
1. Hold the brake pedal down and set the parking brake.
See Parking Brake for more information.
2. Move the shift lever into P (Park) by pushing the lever all the way toward the front of the vehicle.
3. Turn the ignition off.
See also:
Setting Preset PTYs (RDS Only)
These buttons have factory PTY presets. Up to
12 PTYs (six FM1 and six FM2), can be
programmed on the six numbered pushbuttons, by
performing the following steps:
1. Press BAND to select FM1 or ...
Turning a Function On or Off
1. Turn the Menu knob to highlight
the function.
2. Press SELECT to turn the
function on or off. ...
Traction Off Light
This light comes on briefly while starting the engine.
If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then goes off.
The traction ...