Sheet Metal Damage
If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection.
Original manufacturer replacement parts will provide the corrosion protection while maintaining the vehicle warranty
See also:
Treadwear
The treadwear grade is a
comparative rating based on the
wear rate of the tire when tested
under controlled conditions on a
specified government test
course. For example, a tire
graded 150 ...
Compass Calibration
Press and hold the on/off button to activate the
compass calibration mode. CAL will be displayed
in the compass window on the mirror.
The compass can be calibrated by driving the
vehicle in circ ...
Additional Required Services
Every 12 000 km/7,500 Miles
► Rotate tires. Tires should be rotated every 12 000 km/ 7,500 miles. See Tire Rotation
.
At Each Fuel Stop
► Engine oil level check. See Engine Oil .
...
