See also:

License Plate Lamp
To replace one of these bulbs, do the following: 1. Remove the two screws holding the license plate lamp lens. 2. Pull the lens away from the lamp assembly. 3. Pull the old bulb from the bulb ...

System Identification
If the vehicle has the tire sealant and compressor kit shown above, see the operating instructions that follow. If the vehicle has the tire sealant and compressor kit shown above, follo ...

Display Settings
Press the Config button on the Home Page or the CONFIG button on the faceplate, then select Display Settings from the list. The following options may display: Dimming Mode: Press to change the scre ...