Leaving After Parking on a Hill

1. Apply and hold the brake pedal while you:
• start the engine,
• shift into a gear, and
• release the parking brake.
2. Let up on the brake pedal.
3. Drive slowly until the trailer is clear of the chocks.
4. Stop and have someone pick up and store the chocks.

    See also:

    BATTERY SAVER ACTIVE
    This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery saver system starts reducing certain features of the vehicle t ...

    Oil Pressure Gage
    The oil pressure gage shows the engine oil pressure in psi (pounds per square inch) when the engine is running. Canadian vehicles indicate pressure in kPa (kilopascals). Oil pressure may vary ...

    What to Add
    When you do need brake fluid, use only DOT-3 brake fluid. Use new brake fluid from a sealed container only. Always clean the brake fluid reservoir cap and the area around the cap before removing i ...