Delayed Exit Lighting
If it is dark enough outside when you remove the key from the ignition, the interior lamps will turn on and stay on for about 25 seconds. This will give you time to find the door pull handle or lock switches. Once the key is inserted into the ignition, the exit lighting will be cancelled and the lighting will fade out.
See also:
Driver Shift Control (DSC)
Notice:
Driving with the engine at
a high rpm without upshifting
while using Driver Shift Control
(DSC), could damage the vehicle.
Always upshift when necessary
while using DSC.
DSC allows ...
Headlamp High/Low-Beam Changer
(Headlamp High/Low-Beam
Changer): Push the turn signal/lane change lever away from you
and release, to turn the high beams
on. To return to low beams, push
the lever again or pull it toward y ...
StabiliTrak® Indicator Light
This light comes on briefly
while starting the engine.
If it does not, have the vehicle serviced by your
dealer/retailer. If the system is working normally the
indicator light will then go of ...
