Reprogramming Universal Home Remote Buttons
Any of the three buttons can be reprogrammed by repeating the instructions.
See also:
Programming with a Recognized Transmitter (Keyless Access Vehicles Only)
A new transmitter can be programmed to the vehicle when there is one recognized
transmitter. To program, the vehicle must be off and all of the transmitters, both
currently recognized and new, mus ...
Starting Procedure (Key Access)
1. With your foot off the accelerator
pedal, turn the ignition key to
START. When the engine starts,
let go of the ignition.
The idle speed will go down as
your engine gets warm. Do not
rac ...
Traction Control System (TCS)
Warning Light
For vehicles with a
Traction Control System
(TCS) and StabiliTrak®
warning light, this
light comes on briefly
when the engine is started.
If it does not, have the vehicle serviced by you ...
