Distracted Driving
Distraction comes in many forms and can take your focus from the task of driving. Exercise good judgment and do not let other activities divert your attention away from the road. Many local governments have enacted laws regarding driver distraction. Become familiar with the local laws in your area.
To avoid distracted driving, always keep your eyes on the road, hands on the wheel, and mind on the drive.
• Do not use a phone in demanding driving situations.
Use a hands-free method to place or receive necessary phone calls.
• Watch the road. Do not read, take notes, or look up information on phones or other electronic devices.
• Designate a front seat passenger to handle potential distractions.
• Become familiar with vehicle features before driving, such as programming favorite radio stations and adjusting climate control and seat settings.
Program all trip information into any navigation device prior to driving.
• Wait until the vehicle is parked to retrieve items that have fallen to the floor.
• Stop or park the vehicle to tend to children.
• Keep pets in an appropriate carrier or restraint.
• Avoid stressful conversations while driving, whether with a passenger or on a cell phone.
WARNING!
Taking your eyes off the road too
long or too often could cause a
crash resulting in injury or death.
Focus your attention on driving.
Refer to the infotainment section for more information on using that system, including pairing and using a cell phone.
If equipped, refer to the navigation manual for information on that system, including pairing and using a cell phone.
See also:
Radio Data System (RDS)
The audio system has a Radio Data
System (RDS). RDS features are available
for use only on FM stations that broadcast
RDS information.
With RDS, the radio can do the following:
• Seek to st ...
Checking Engine Oil
It is a good idea to check the engine
oil level at each fuel fill. In order to
get an accurate reading, the vehicle
must be on level ground. The
engine oil dipstick handle is a yellow
loop. ...
Using the Digit Dial Command
1. Press and hold for two
seconds. The system
responds with “Ready” followed by a tone.
2. Say “Digit Dial”. The system responds with “Digit
dial using <phone name>, please say ...
