Driving Information

See also:

Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured)
To use the air compressor to inflate a tire with air only and not sealant: Always do a safety check first. See If a Tire Goes Flat . 1. Remove the tire sealant and compressor kit from its stor ...

License Plate Lamp
To replace one of these bulbs, do the following: 1. Remove the two screws holding the license plate lamp lens. 2. Pull the lens away from the lamp assembly. 3. Pull the old bulb from the bulb ...

Fog Lamps
To turn on the fog lamps, the ignition and the headlamps or parking lamps must be on. If the fog lamps are turned on while the exterior lamp switch is in the AUTO position, the headlamps come on ...