See also:

Erasing Universal Home Remote Buttons
The programmed buttons should be erased when the vehicle is sold or the lease ends. To erase either Rolling Code or Fixed Code on the Universal Home Remote device: 1. Press and hold the two outs ...

Flash-to-Pass
To flash the high beams, pull the turn signal/lane change lever all the way toward you. Then release it. ...

When You Are Ready to Leave AfterParking on a Hill
1. Apply your regular brakes and hold the pedal down while you: • start your engine, • shift into a gear, and • release the parking brake. 2. Let up on the brake pedal. 3. Drive slowly unt ...