Starting the Vehicle Messages
JUMP START ACTIVE WAIT TO START
This message displays while performing an on-board jump start of the vehicle. See “Jump Starting (On-board with eAssist Only)” for more information.
JUMP START COMPLETE ATTEMPT START
This message displays while performing an on-board jump start of the vehicle. See “Jump Starting (On-board with eAssist Only)” for more information.
JUMP START DISABLED SEE OWNERS MANUAL
This message displays if there is a problem with the on-board jump start system. Take the vehicle to your dealer for service.
See also:
Taillamps and Turn Signal Lamps
To replace a taillamp or turn signal bulb, do
the following:
1. Open the liftgate.
2. Remove the two
screws from the
taillamp assembly.
3. Pull the taillamp assembly away from the
vehicle ...
Remote Keyless Entry (RKE)
System
The RKE transmitter is used to remotely lock and
unlock the doors from up to 60 m (195 feet) away from
the vehicle.
Press
to unlock the
driver door. Press again
within five seconds to ...
Sending a Number During a Call
1. Press . The system responds
with “Ready”
followed by a tone.
2. Say “Dial”. The system responds with “Say a
number to send tones” followed by a tone.
3. Say the number to send.
...
