Setting the 12/24 Hour Format

1. Press the CONFIG button and select Time and Date Settings, or press 2. Highlight Set Time Format..

2. Highlight Set Time Format.

3. Press SELECT to select the 12 hour or 24 hour display format.

    See also:

    Flash-to-Pass
    This feature lets you use the high-beam headlamps to signal the driver in front of you that you want to pass. It works even if your headlamps are off. Pull the turn signal lever toward you briefl ...

    Fuses and Circuit Breakers
    The wiring circuits in your vehicle are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of fires caused by electrical problems. Look ...

    Winter Tires
    Consider installing winter tires on the vehicle if frequent driving on snow or ice covered roads is expected. All season tires provide good overall performance on most surfaces, but they may not offer ...