Call Waiting

Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier.

► Press to answer an incoming call when another call is active. The original call is placed on hold. to answer an incoming call when another call is active. The original call is placed on hold.

► Press again to return to the original call. again to return to the original call.

► To ignore the incoming call, no action is required.

► Press to disconnect the current call and switch to the call on hold. to disconnect the current call and switch to the call on hold.

    See also:

    TPMS Malfunction Light and Message
    The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the low tire warning light flashes for about one minute a ...

    TPMS Sensor Matching Process
    Each TPMS sensor has a unique identification code. Any time you rotate your vehicle’s tires or replace one or more of the TPMS sensors, the identification codes will need to be matched to the n ...

    Erasing Universal Home RemoteButtons
    To erase programming from the three Universal Home Remote buttons do the following: 1. Press and hold down the two outside buttons until the indicator light begins to flash, after 20 seconds. Do ...