Park Tilt Mirrors

If the vehicle has memory mirrors, the outside mirrors have park tilt mirrors. This feature tilts the driver’s side and passenger side mirror to a factory programmed position when the vehicle is in R (Reverse). This feature may be useful in allowing you to view the curb when you are parallel parking.

When the vehicle is shifted out of R (Reverse) and either a five second delay has occurred, or the ignition is turned to LOCK/OFF, the driver and passenger side mirrors return to their original position.

See DIC Vehicle Customization for more information.

    See also:

    Without Selective Ride Control
    1. Move the shift lever to the left from D (Drive). The transmission will enter Manual Mode. The DIC gear indicator will change to an M followed by a number representing the gear the vehicl ...

    2011 Buick Regal Review
    More than a few surprises have accompanied the rebirth of General Motors. Chief among them is the resurgence of Buick, which was chosen as one of just four brands GM kept alive, even as it euthani ...

    Jump Starting
    If your vehicle’s battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. CAUTION: Batterie ...