Console Shift
If the console shifter cannot be moved out of P (Park) 1. Apply and maintain the regular brakes.
2. Turn the ignition to ON/RUN position. See Ignition Positions for more information.
3. Let up on the shift lever and make sure the shift lever is pushed all the way into P (Park).
4. Then, move the shift into the desired gear.
If you still cannot move the shift lever from P (Park), consult your dealer/retailer or a professional towing service.
See also:
SBZA Detection Zones
The SBZA sensor covers a zone of
approximately one lane over from
both sides of the vehicle,
or 3.5m(11 ft). This zone starts at
each side mirror and goes back
approximately 5.0 m(16 ft). Th ...
New Vehicle Break-In
Notice: The vehicle does not need an elaborate break-in. But it will perform
better in the long run if you follow these guidelines:
Do not drive at any one constant speed, fast or slow, for the ...
License Plate Lamp
To replace one of these bulbs:
1. Push the left end of the lamp assembly toward the right.
2. Turn the lamp assembly down to remove it from the fascia.
A. Bulb Socket
B. Bulb
C. Lamp Assembly ...