Ride Control System Messages
SERVICE TRACTION CONTROL
This message displays when there is a problem with the Traction Control System (TCS). When this message is displayed, the system will not limit wheel spin. Adjust your driving accordingly. See your dealer for service.
SERVICE STABILITRAK
This message displays if there is a problem with the StabiliTrak® system. If this message appears, try to reset the system. Stop; turn off the engine for at least 15 seconds; then start the engine again. If this message still comes on, it means there is a problem. See your dealer for service. The vehicle is safe to drive; however, you do not have the benefit of StabiliTrak, so reduce your speed and drive accordingly.
SPORT MODE ON
This message displays when using the interactive drive control. See Interactive Drive Control System for more information.
TRACTION CONTROL OF
This message displays when the Traction Control System (TCS) is turned off. Adjust your driving accordingly.
TRACTION CONTROL ON
This message displays when the Traction Control System (TCS) is turned on.
See also:
Immobilizer
See Radio Frequency Statement for information regarding Part 15 of the
Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310. ...
Starting the Vehicle
To start the engine using the remote start feature:
1. Aim the RKE transmitter at the vehicle.
2. Press and release .
3. Immediately after completing Step 2, press and hold
until the turn signa ...
Erasing Universal Home RemoteButtons
You should erase the programmed buttons when
you sell the vehicle or terminate your lease.
To erase either rolling code or fixed code on the
Universal Home Remote device, do the following:
1. ...
