Antilock Brake System (ABS) Warning Light

The Antilock Brake System (ABS) light comes on briefly when the engine is started.

The Antilock Brake System (ABS) light comes on briefly when the engine is started.

If the light does not come on, have it fixed so it will be ready to warn if there is a problem.

If the ABS light stays on, turn the ignition off. If the light comes on while driving, stop as soon as it is safely possible and turn the ignition off. A chime may also sound when the light comes on steady. Then start the engine again to reset the system. If the ABS light stays on, or comes on again while driving, the vehicle needs service. If the regular brake system warning light is not on, the vehicle still has brakes, but not antilock brakes. If the regular brake system warning light is also on, the vehicle does not have antilock brakes and there is a problem with the regular brakes.

See Brake System Warning Light .

See Driver Information Center (DIC)  for all brake related DIC messages.

    See also:

    Steering Wheel Controls
    For vehicles with audio steering wheel controls, some audio controls can be adjusted at the steering wheel. : Press to interact with the available Bluetooth, OnStar, or navigation system. : P ...

    Engine Identification
    The eighth character in the VIN is the engine code. This code identifies the vehicle’s engine, specifications, and replacement parts. See “Engine Specifications” under Capacities and Speci ...

    Gate Operator and CanadianProgramming
    Canadian radio-frequency laws require transmitter signals to time out or quit after several seconds of transmission. This may not be long enough for Universal Home Remote to pick up the signal dur ...