Driving Information
See also:
Unit
Move to switch between
metric or US when the Unit display
is active. Press SET/CLR to confirm
the setting. This will change the
displays on the cluster and DIC to
either metric or English ( ...
License Plate Lamp
To replace one of these bulbs:
1. Push the left end of the lamp assembly toward the right.
2. Turn the lamp assembly down to remove it from the fascia.
A. Bulb Socket
B. Bulb
C. Lamp Assembly ...
Engine Overheating
This emergency operating mode allows the vehicle to be driven to a safe place
in an emergency situation. If an overheated engine condition exists, an overheat
protection mode which alternates firi ...