Flash-to-Pass
To flash the high beams, pull the turn signal/lane change lever all the way toward you. Then release it.
See also:
Checking Coolant
The vehicle must be on a level surface when checking
the coolant level.
The coolant level should be at or above the FULL
COLD mark when the engine is cold. The coolant level
should be above the ...
Instrument Cluster
English Cluster Shown, Metric Similar ...
Removing and Replacing the Floor Mats
Pull up on the rear of the floor mat to unlock each retainer and remove.
Reinstall by lining up the floor mat retainer openings over the carpet retainers
and snap into position.
Make sure the fl ...