Compass Messages
CAL
This message is displayed when the compass needs to be calibrated. See Compass .
– – –
Three dashes will be displayed if the compass needs service. See your dealer for service.
See also:
StabiliTrak® OFF Light
This light comes on when the StabiliTraK system is turned off.
If the Traction Control System (TCS) is off, wheel spin is not limited.
If StabiliTrak is off, the system does not assist in controll ...
Using the Re-dial Command
1. Press and hold for two
seconds. The system
responds with “Ready” followed by a tone.
2. After the tone, say “Re-dial”. The system responds
with “Re-dial using <phone name> ...
Memory Seat, Mirrors, and Pedals
The controls for the
memory function are
located on the
driver’s door.
These buttons are used to program and recall
memory settings for the driver’s seating position,
both outside mirror ...