Arming the System
To arm the system, press Q on the RKE transmitter.
The alarm automatically arms after about 30 seconds. The security light, located on the instrument panel, flashes.
PressVon the RKE transmitter to open the trunk without setting off the alarm. The system rearms when the trunk is closed.
See also:
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Remove the plastic cover.
2. Unscrew the connector (B) from
the canister (A).
3. Pull up on the canister (A) to
remove it.
4. Replace with a new canister
...
Compass
There is a compass display in the Driver Information Center (DIC). The compass
receives its heading and other information from the Global Positioning System (GPS)
antenna, StabiliTrak, and vehicle ...
How the System Works
URPA comes on automatically when the shift lever
is moved into R (Reverse). The rear display briefly
illuminates to indicate the system is working.
URPA operates only at speeds less than 8 km/h
...