See also:

New Vehicle Break-In
Notice: The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: ► Do not drive at any one constant speed, fast or slow, for t ...

Taillamps and Turn Signal Lamps
To replace a taillamp or turn signal bulb, do the following: 1. Open the liftgate. 2. Remove the two screws from the taillamp assembly. 3. Pull the taillamp assembly away from the vehicle ...

EPB Release
To release the EPB, place the ignition in the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brak ...