Manual Front Seats
To adjust a manual seat:
1. Pull the handle at the front of the seat.
2. Slide the seat to the desired position and release the handle.
3. Try to move the seat back and forth to be sure it is locked in place.
Seat Height Adjuster
If available, move the lever up or down to manually raise or lower the seat.
Seat Cushion Tilt Feature
If available, move the lever up or down to raise or lower the front of the seat cushion.
Reclining Seatbacks
To recline the seatback:
1. Lift the lever.
2. Move the seatback to the desired position, then release the lever to lock the
seatback in place.
3. Push and pull on the seatback to make sure it is locked.
To return the seatback to an upright position:
1. Lift the lever fully without applying pressure to the seatback, and the seatback
returns to the upright position.
2. Push and pull on the seatback to make sure it is locked.
See also:
Turning the System On and Off
The URPA system can be turned on
and off using the park assist button
located next to the shift lever.
The LED next to the park assist
button lights up when the system is
on and turns off w ...
Cooling System
When you decide it is safe to lift the hood, here is
what you will see:
A. Coolant Recovery Tank
B. Radiator Pressure Cap
C. Engine Fan
A. Coolant Recovery Tank
B. Radiator Pressure Cap
C. ...
Playing from an iPhone®
This feature supports the following
iPhone model:
• iPhone (3G – 3GS)
To use the iPhone, follow the same
instructions as stated earlier for
using an iPod. ...