Shoulder Belt Height Adjuster

The vehicle has a shoulder belt height adjuster for the driver and right front passenger seating positions.

Adjust the height so the shoulder portion of the belt is on the shoulder and not falling off of it. The belt should be close to, but not contacting, the neck. Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash. See How to Wear Safety Belts Properly .

Press the release button (A) and move the height adjuster to the desired position. The adjuster can be moved up by pushing the slide/ trim up. After the adjuster is set to the desired position, try to move it down without pushing the release button to make sure it has locked into position.

Press the release button (A) and move the height adjuster to the desired position. The adjuster can be moved up by pushing the slide/ trim up. After the adjuster is set to the desired position, try to move it down without pushing the release button to make sure it has locked into position.

    See also:

    Engine Cooling System Messages
    A/C OFF DUE TO HIGH ENGINE TEMP This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning com ...

    Passenger Safety BeltReminder Light
    Several seconds after the key is turned to RUN or START, a chime will sound for several seconds to remind the front passenger to buckle their safety belt. This would only occur if the passenger air ...

    Customer Satisfaction Procedure (Mexico)
    Did you get the Warranty Extension Plan? This plan is recommended by General Motors to supplement the warranty included with the new vehicle purchase. See your dealer for details. Customer ...